WALL 20

An efficient wall-mounted, recessed light fixture

Use WALL to bring light to table tops and stairs or sides of a wall. You’re able to create safety lighting for dark hallways with WALL. You can also use WALL as indirect mood light in any room. The end result is always spectacular!
WALL is only 26mm deep allowing installation on a sheet wall without alterations to wall support structures. The led strip can be shortened to a desired length at 3,3 cm intervals, whereas the profile has a standard length of 2m and can be shortened to a desired length.
LIMENTE WALL IP44 B is available in standard lengths of 2 and 4 meters. The fixture can be shortened to a desired length at 3,3 cm intervals. A range of accessories, such as corner pieces, give the installation a stylish look. LIMENTE WALL IP44 B comes with quality LEDs with a color rendering index of CRI> 85, an efficiency of 126 lm/W, a luminosity of 1512 lm/m and a color temperature of about 4000K (small color temperature differences may vary by production batches). The fixture includes a matte protective glass diffuser, which makes the light even and continuous and makes the light a bit warmer in light color. All technical values are given to the led strip without a diffuser.
In addition to LIMENTE WALL IP44 B, LIMENTE UP is available in two different versions: the LUX collection version LIMENTE WALL IP44 LUX (IP44, CRI>90, 3000K and 4000K) and the color temperature adjustable CCT version LIMENTE WALL IP44 CCT (IP44, CRI>80, 2700K-6000K).
For bigger projects, WALL can be special ordered to execute up to 30m of different kinds of lighting designs. When special ordering for a bigger project, the profile is available in any color in the RAL color chart. LIMENTE WALL is a part of LIMENTE LINEAR concept, in which simple and reasonably priced indirect lighting designs are in focus. The collection includes three different options for fixtures: WALL, DUO and UP.
To use LIMENTE WALL, you’ll need a suitable 24V power supply. Compatible products are mentioned alongside the product. The profile, the led strip and the power supply are also sold separately. N.B.! The power supply must be ordered separately.

Dimming and lighting control

Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cozy by dimming your LIMENTE WALL IP44 B with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.

LIMENTE WALL IP44 B is dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE series 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640543, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.

LIMENTE WALL IP44 B is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.

Installation

LIMENTE WALL IP44 B is fast and easy to install with the installation tools included.

The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the WALL profile. A power supply cable at both ends of the fixture enables LIMENTE WALL IP44 B to be used as two separate lights. The fixture can be shortened to a desired length at 3,3 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.

WALL IP44 B can also be used in its full length (2 or 4 m). When wanting to use the whole length, simply cut off the power supply cable at the other end.

When installing, cut the profile into the desired length and attach in place with the installation tools and clips included. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors.