NEON mini-35 20

NeonMini - A Slender Neon Light Strip

LIMENTE NeonMini is specifically designed for mood lighting and applications where the light fixture needs to be recessed into the interior, remaining virtually invisible. The NeonMini is an exceptionally small strip, measuring only 3 x 5 mm. It is ideal for installation in grooves on the sides of closets, furniture, and for plinth or countertop accent lighting—essentially anywhere a discreet lighting solution is required. The long 4 m model is also perfect for continuous mood lighting along baseboards and surfaces.

The LIMENTE NeonMini strips are available in standard lengths of 2 m and 4 m. They feature a high color rendering index of CRI >90, ensuring that the colors of the illuminated object appear as natural as possible. The color temperature is selectable at either 3000 K or 4000 K. The 2 m and 4 m strips come standard with a 30 cm + 300 cm cable at both ends. If this is not sufficient, you can order an extension cable (3 m), product number 681588. A maximum of one extension cable can be connected per fixture cable, bringing the maximum total cable length to six meters. The power supply cable at both ends allows the strip to be used in two separate parts. This approach prevents unnecessary waste and enables the strip to be installed in two different directions from the power source.

The NeonMini strip must be used with a compatible 24 V power supply. Suitable options are listed alongside the products. If the dimensions of a pre-configured set do not meet your requirements, you can also order the profile, strip, and power supply separately. NOTE! The power supply must always be ordered separately.

Adjusting the lighting

The LIMENTE NeonMini is dimmable with the LIMENTE SMART 512 IR door switch. LIMENTE SMART 512 IR door switch acts as an automatic door ON / OFF switch or when used as a door switch, the switch turns on the lights when the door is opened and turns them off when the door is closed.

The LIMENTE SMART SENSOR electronic unit has a memory that keeps the lights in the setting they were last set to (e.g. off), even if the unit is momentarily without power, e.g. during a power outage.

Installation

The LIMENTE NeonMini strip is fast and easy to install.

The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the NeonMini strip. The Neon strip is pressed into place. Finally, connect the power supply cable to the light strip and to the power supply.

The NeonMini strip can be shortened to a desired length at about 2 cm intervals. The Neon strips feature a power supply at both ends, allowing you to utilize each end separately if needed. NeonMini strips must always be installed either into a groove made in the surface or into an optional Neon profile.