PROFILE INSER

Aluminum profile for LED strips

LIMENTE PROFILE INSER is an aluminum profile designed to be recessed in furniture. The profile is submerged to furniture level and only a sleek thin edge of the profile is visible. The profile can be used to design both a working light and a mood light, e.g. in a kitchen workspace or on shelves and other surfaces where light is needed! The profile is only 8.5 mm deep allowing installation on a sheeted wall without a need to change the wall support structures. The diffuser in LIMENTE PROFILE INSER is slightly arched, whereas LIMENTE PROFILE INSER MINI has a straight diffuser.
The profile has a standard length of 2 meters and can be shortened to a desired length using a hacksaw or a circular saw. When the profile is cut to a proper length, simply install the led strip inside. End pieces are included in delivery.
INSER profile is easy to install. Use INSER profile for a smooth installation and extend the lifetime of the led strip. Take your pick from the several different options of LIMENTE RIBBON (available in different lengths, different technical values and IP classifications) to suit your personal lighting design. N.B.! The led strip and power supply must be ordered separately.

Dimming and lighting control

Combine any LIMENTE RIBBON led strip with either LIMENTE SMART CLASSIC, LUXUS and GREENLINE series wireless dimming and lighting control system. With our SMART systems, you can easily change the lighting and ambience in your home from efficient and bright to dim and cozy with just a push of a button.
LIMENTE RIBBON IP20 and LIMENTE RIBBON IP44 are dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640543, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.
RIBBON is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.
LIMENTE RIBBON IP44 CCT requires the dimmer LIMENTE SMART 560 (no. 640560) and the wireless wall switch (no. 640561 and 640562) from our LIMENTE SMART series to use.

Installation

LIMENTE profiles are cut to a desired length using a hacksaw or a circular saw and an installation trail for the profile is carved into the place of installment. Afterwards, the profile is glued in place.